Noveske marked 3 lug HK style adapter. 1/2 x 28 threads for 9mm operation.

The Superlative Arms patented “Bleed Off” direct impingement gas block for the AR15 platform adjusts the gas flow by bleeding the gas out of the block instead of restricting the flow like conventional adjustable blocks. - Results: - The pressure used in the block is reduced only to the amount required to drive the bolt carrier. The remaining gas / pressure are bled out of the block allowing the system to run much cleaner and cooler. - Reduction of felt recoil. - Patent pending adjustment detent is located outside of the block and therefore no contamination. - The gas adjustment screw does not restrict the gas flow; therefore there is no erosion or seizing of the screw / no loss of detent due to carbon build up. Although it is removable we have added a safety mechanism which stops you from unintentionally backing the screw all the way out. - When using SBR’s and / or suppressors the bleed off port allows the excessive pressure to be exhausted out of the block reducing blow back. - Data - Gas Block Material: 416 SS - Finish: Melonite QPQ - Barrel Diameter: 0.750 - Weight: 1.68 oz. - Length: 1.00 - Attachment Type: Solid - Gas Adjustment: (Patent Pending) 30 Locked Positions Front Of Block - Bleed Off Port: (Patent Pending) Front Of Block - Included - Gas Block - Assembled - (2) 10-32 x 3/16 Set Screws - (1) Gas Tube Roll Pins - (1) 3/32 X 6 L-Shaped Hex Keys

The Super Charging Handle (SCH) is 3D machined from a solid block of aircraft grade 7075-T6 aluminum. Its ambidextrous design allows for seamless operation from either side of the weapon. The levers are dual contoured similar to that of the charging handle of an M14 where not only the x-axis but also the y-axis receive radius cuts. The handling surface of the lever is also checkered adding a textured grip aiding to the use when operating with gloves. The heightened rear lip of the SCH aids in mitigating gas blow back to the shooter when shooting with short barreled and suppressed weapon systems. All parts are then Type 3 Hardcoat anodized and are available in Black and DDC.

5.56 Bolt Carrier Group - Black Phosphate Finish - Mil-Spec - Shot peened & MP tested bolt - Full Auto carrier w/staked carrier key

The Super Charging Handle (SCH) is 3D machined from a solid block of aircraft grade 7075-T6 aluminum. Its ambidextrous design allows for seamless operation from either side of the weapon. The levers are dual contoured similar to that of the charging handle of an M14 where not only the x-axis but also the y-axis receive radius cuts. The handling surface of the lever is also checkered adding a textured grip aiding to the use when operating with gloves. The heightened rear lip of the SCH aids in mitigating gas blow back to the shooter when shooting with short barreled and suppressed weapon systems. All parts are then Type 3 Hardcoat anodized and are available in Black and DDC.

Noveske Ambi STS (Short Throw Selector) 60 Degree Selector - 60 Degree Throw - Tuned for standard actuation force from safe & smooth return from fire - Machined stainless construction with nitride finish - Included: - Included Ambi selector drum - 2 Screws - A short & a long Magpul SSG Lever for operator preference

RCA 5.56 Black Nitride Bolt Carrier Group M16 - Noveske marked with a black nitride finish. Carrier features 8620 steel with 158 Carpenter Steel bolt and 9310 tool steel extractor and cam pin. - Much more than typical Parkerizing phosphating or black oxide Blacknitriding is a thermal chemical diffusion of nitrogen and carbon into the surface of the steel. This process increases wear-resistance fatigue strength corrosion resistance lubricity and cosmetic appeal.