The CAM-LOK™ (Covert Application Mount-Locking) is a universal QD piston system comprised of two parts the piston and the barrel adapter. This product page is for the piston (bronze color part that is installed in the suppressor). - The Griffin Armament CAM-LOK™ interface affords the user the ability to convert the suppressor to a much faster and more secure mounting solution on browning style action (tilt barrel) pistols vs it’s legacy technology single piece direct thread piston counterparts. This system provides a rapid secure attachment to the host pistol. Direct thread single piece pistons have several negative attributes. They do not accept tools and are hand tightened to the host firearm. As a result of hand installation they loosen when the piston system reciprocates under slide cycling during the firing sequence. This vibration and inadvertent loosening of pistol silencers requires end users to constantly check tighten pistol silencers. This periodically causes users to have bad range days with unforeseen baffle strikes and end cap strikes. These unfortunate events cause logistically burdensome work for consumers to communicate with service departments ship products back and forth and sometimes assume charges for repair for these issues. - No longer do users need to worry about their pistol suppressors loosening during use (as with traditional fixed direct thread pistons). The CAM-LOK™ system supports a 3/4 socket wrench for installation with prevailing torque and features a taper lock system which encourages secure attachment despite the piston still actuating for and aft during the firing sequence. The piston can be attached / detached in any one of three 120 degree positions ensuring there are no false positive interfacing positions to slow deployment of the suppressor onto the host firearm. Additionally the manufacturing accuracy of the interface is held to Griffin Armament’s high quality standards for squareness and concentricity ensuring that each mounting position has similar and minimal POI shift influence. To support this the mating pistons have all mating diameters and interfacing geometry qualified in a single operation for tool quality accuracy and perfection. A similar manufacturing theory was applied to the barrel adapter for maximum alignment accuracy. - End users benefit from being able to attach their silencer to various adapter interfaced host firearms without having to disassemble the suppressor and change the piston to a different thread pitch. The CAM-LOK™ pistons are universal; accommodating any pistol mounted with a 3 Lug CAM-LOK™ barrel adapter. Additionally end users with different brand suppressors supported by the CAM-LOK™ piston family will be able to benefit from the interchangeability of CAM-LOK™ barrel adapters between piston models. - Features : - Patented CAM-LOK™ (Covert Application Mount-Locking) universal QD piston attachment system - 3 mounting positions 120 degrees separated for rapid mounting - Internal taper surface locks in place with interfacing barrel adapters and drastically reduces or eliminates common baffle/end cap strikes - Compatible with Universal QD pistons barrel adapters (sold separately) - Total system weight is identical to legacy direct thread pistons - H900 heat treated for improved durability and wear resistance - 17-4 stainless steel material

The CAM-LOK™ (Covert Application Mount-Locking) is a universal QD piston system comprised of two parts the piston and the barrel adapter. This product page is for the piston (bronze color part that is installed in the suppressor). - The Griffin Armament CAM-LOK™ interface affords the user the ability to convert the suppressor to a much faster and more secure mounting solution on browning style action (tilt barrel) pistols vs it’s legacy technology single piece direct thread piston counterparts. This system provides a rapid secure attachment to the host pistol. Direct thread single piece pistons have several negative attributes. They do not accept tools and are hand tightened to the host firearm. As a result of hand installation they loosen when the piston system reciprocates under slide cycling during the firing sequence. This vibration and inadvertent loosening of pistol silencers requires end users to constantly check tighten pistol silencers. This periodically causes users to have bad range days with unforeseen baffle strikes and end cap strikes. These unfortunate events cause logistically burdensome work for consumers to communicate with service departments ship products back and forth and sometimes assume charges for repair for these issues. - No longer do users need to worry about their pistol suppressors loosening during use (as with traditional fixed direct thread pistons). The CAM-LOK™ system supports a 3/4 socket wrench for installation with prevailing torque and features a taper lock system which encourages secure attachment despite the piston still actuating for and aft during the firing sequence. The piston can be attached / detached in any one of three 120 degree positions ensuring there are no false positive interfacing positions to slow deployment of the suppressor onto the host firearm. Additionally the manufacturing accuracy of the interface is held to Griffin Armament’s high quality standards for squareness and concentricity ensuring that each mounting position has similar and minimal POI shift influence. To support this the mating pistons have all mating diameters and interfacing geometry qualified in a single operation for tool quality accuracy and perfection. A similar manufacturing theory was applied to the barrel adapter for maximum alignment accuracy. - End users benefit from being able to attach their silencer to various adapter interfaced host firearms without having to disassemble the suppressor and change the piston to a different thread pitch. The CAM-LOK™ pistons are universal; accommodating any pistol mounted with a 3 Lug CAM-LOK™ barrel adapter. Additionally end users with different brand suppressors supported by the CAM-LOK™ piston family will be able to benefit from the interchangeability of CAM-LOK™ barrel adapters between piston models. - Features : - Patented CAM-LOK™ (Covert Application Mount-Locking) universal QD piston attachment system - 3 mounting positions 120 degrees separated for rapid mounting - Internal taper surface locks in place with interfacing barrel adapters and drastically reduces or eliminates common baffle/end cap strikes - Compatible with Universal QD pistons barrel adapters (sold separately) - Total system weight is identical to legacy direct thread pistons - H900 heat treated for improved durability and wear resistance - 17-4 stainless steel material

Griffin Armament is proud to introduce DUAL-LOK our newest QD mounting system for rifle suppressors. The DUAL-LOK system is comprised from two components the DUAL-LOK Mount or equipped suppressor and the DUAL-LOK muzzle device (of your choice). This page is for the DUAL-LOK HUB Mount a 1.375x24 threaded interface. - A quality QD system should be accurate robust reliable require minimal training and be free of wear prone metal on metal teeth or ratchets thereby guaranteeing a longer trouble free service life with minimal maintenance needed. Griffin’s DUAL-LOK QD mounting system was designed around these objectives. - What makes this mounting system unique? It is a combination of desirable mechanical features and performance characteristics in a lightweight yet compact system. DUAL-LOK has great potential for widespread product application. A precision taper interface (one locking feature) between the mount and the device ensures accuracy. An ACME thread provides speed and ease of attachment. A robust 17-7 Wave spring (718 inconel on integrated mount Griffin suppressors) provides a reliable and positive heat resistant spring action to the redundant locking collar (second locking feature). The locking collar is semi permanently installed to the mount via factory pressed grooved stainless steel taper pins. Since the mount has no wear prone metal on metal sliding actions like many other mounts there is no need for the operator to disassemble the system. This locking ring includes three anti-rotation splines which ensure the suppressor will not come off inadvertently. The muzzle device integrates 60 machined mounting position grooves which is doubled by the mount’s two locking positions hence the double entendre DUAL-LOK. How is this achieved? The mounts’ two locking positions are machined out of phase of one another by 3 degrees which provides the 120 effective locking positions and ensures a tightly mounted and locked suppressor. When the suppressor is installed only one of the two positions will generally function by allowing the spring to push the locking collar rearward over the splines. - Substantial efforts are taken in the manufacturing and inspection of the DUAL-LOK products to ensure Griffin customers are outfitted with the best QD mounting systems available. - Diameter: 1.5 [unit] with 1.375x24 [threads] - OAL: 1.7 - Weight: 3.0 ounces - Materials: 17-4PH stainless steel 17-7 stainless spring steel - Finish: Black Nitride - Key points : - Utility patent is pending - Wear free mounting system requires no consumable parts - Taper lock interface ensures security and accuracy - ACME thread provides speed of attachment - Locking ring incorporates 3 anti-rotation splines to eliminate inadvertent loosening - 120 effective positions ensure a rock-solid suppressor mount and provide extremely low POI shift - 17-4 stainless steel - Robust wave spring - 2 Locking positions and a central unlock position - Nitrided black for increased surface hardness corrosion and wear resistance - Compatible with : - DUAL-LOK Minimalist Brake - DUAL-LOK Minimalist Stealth Flash Suppressor - DUAL-LOK Paladin Brake - DUAL-LOK Stealth Flash Suppressor (2.25) - DUAL-LOK Tactical Compensator - DUAL-LOK Titanium Minimalist Brake (6AL4V) - Griffin Bushwhacker EXPLORR EU (Utility) models & other 1.375x24 threaded suppressors

The SN-ACH (Suppressor Normalized Ambidextrous Charging Handle) is a patented modernized feature filled charging handle that will satisfy any AR15 user. The SN-ACH features a gas check groove and a suppressor gas vent that reduces gas in the face of the shooter when using a suppressor. Configurable levers were also added so that a user could choose to run the included large lever which works with gloved hands or purchase and modularly use the smaller levers (available separately) without having to buy an entirely new handle at a excessive cost. The bolt carrier engaging hook features durable reinforced geometry for 30% increase in strength over milspec handles and approximately 3 times as strong as inferior 6061 handles which routinely break under hard use. Fitment bearing surfaces on the handle mating ensures reduced wobble fitment with the AR15 and AR10 upper receiver. The handle is made from 7075-T6 aluminum and hard coated for optimal wear resistance- the Griffin SN-ACH is the finest charging handle available for the AR series family of firearms. - FITMENT: AR15- fits all typical AR-15/M-4/M16 family firearms

The SN-ACH (Suppressor Normalized Ambidextrous Charging Handle) is a patented modernized feature filled charging handle that will satisfy any AR15 user. The SN-ACH features a gas check groove and a suppressor gas vent that reduces gas in the face of the shooter when using a suppressor. Configurable levers were also added so that a user could choose to run the included large lever which works with gloved hands or purchase and modularly use the smaller levers (available separately) without having to buy an entirely new handle at a excessive cost. The bolt carrier engaging hook features durable reinforced geometry for 30% increase in strength over milspec handles and approximately 3 times as strong as inferior 6061 handles which routinely break under hard use. Fitment bearing surfaces on the handle mating ensures reduced wobble fitment with the AR15 and AR10 upper receiver. The handle is made from 7075-T6 aluminum and hard coated for optimal wear resistance- the Griffin SN-ACH is the finest charging handle available for the AR series family of firearms. - FITMENT: AR-10- fits Armalite AR10 KAC SR25/M110 DPMS LR308 rifles and rifles with SR-25/AR10/LR-308 compatible charging handles.

Griffin Armament is proud to introduce DUAL-LOK our newest QD mounting system for rifle suppressors. The DUAL-LOK system is comprised from two parts the DUAL-LOK Mount and the DUAL-LOK muzzle device (of your choice). This page is for the DUAL-LOK Titanium Minimalist Brake. - The muzzle device integrates 60 machined mounting position grooves which is doubled by the mount’s two locking positions hence the double entendre DUAL-LOK. How is this achieved? The mounts’ two locking positions are machined out of phase of one another by 3 degrees which provides the 120 effective locking positions and ensures a tightly mounted and locked suppressor. When the suppressor is installed only one of the two positions will generally function by allowing the spring to push the locking collar rearward over the splines. - Constructed of 17-4 PH stainless steel the DUAL-LOK Minimalist Brake has a wear resistant baffle that increases suppressor service life. Additionally the brake features compensating ports that help reduce muzzle climb while assisting in reducing felt recoil. The Minimalist Brake weighs 2.6 ounces and is less than an 1.5 long adding minimal weight and length compared to that of most competing suppressor mounts. The lighter weight reduces suppressor system weight while making the host firearm barrel lighter and more responsive to the shooter. Each brake comes with a shim set for timing. - The 6.5mm option allows for optimal braking performance and sound performance with a suppressor on 6.5 grendel 6.5 creedmoor 260 remington 6.5x47 Lapua etc. - Diameter: 1.07 [grooves] .93 [unit] - OAL: 1.42 - Weight: 2.3 oz - Materials: 17-4 Stainless Steel - Finish: QPQ Nitrided - Key points : - Utility patent pending - Wear free mounting system requires no consumable parts - Taper lock interface ensures security and accuracy - 120 effective positions ensure a rock-solid suppressor mount and provide extremely low POI shift - Sacrificial baffle to extend the service life of your silencer - Lighter than most market competitive suppressor mounts - 17-4 PH Stainless steel - Nitrided for increased surface hardness corrosion and wear resistance - ¾ wrench flats on muzzle devices - Shim set Included

Griffin Armament is proud to introduce DUAL-LOK our newest QD mounting system for rifle suppressors. The DUAL-LOK system is comprised from two parts the DUAL-LOK Mount and the DUAL-LOK muzzle device (of your choice). This page is for the DUAL-LOK Titanium Minimalist Brake. - The muzzle device integrates 60 machined mounting position grooves which is doubled by the mount’s two locking positions hence the double entendre DUAL-LOK. How is this achieved? The mounts’ two locking positions are machined out of phase of one another by 3 degrees which provides the 120 effective locking positions and ensures a tightly mounted and locked suppressor. When the suppressor is installed only one of the two positions will generally function by allowing the spring to push the locking collar rearward over the splines. - Constructed of 17-4 PH stainless steel the DUAL-LOK Minimalist Brake has a wear resistant baffle that increases suppressor service life. Additionally the brake features compensating ports that help reduce muzzle climb while assisting in reducing felt recoil. The Minimalist Brake weighs 2.6 ounces and is less than an 1.5 long adding minimal weight and length compared to that of most competing suppressor mounts. The lighter weight reduces suppressor system weight while making the host firearm barrel lighter and more responsive to the shooter. Each brake comes with a shim set for timing. - The 6.5mm option allows for optimal braking performance and sound performance with a suppressor on 6.5 grendel 6.5 creedmoor 260 remington 6.5x47 Lapua etc. - Diameter: 1.07 [grooves] .93 [unit] - OAL: 1.42 - Weight: 2.3 oz - Materials: 17-4 Stainless Steel - Finish: QPQ Nitrided - Key points : - Utility patent pending - Wear free mounting system requires no consumable parts - Taper lock interface ensures security and accuracy - 120 effective positions ensure a rock-solid suppressor mount and provide extremely low POI shift - Sacrificial baffle to extend the service life of your silencer - Lighter than most market competitive suppressor mounts - 17-4 PH Stainless steel - Nitrided for increased surface hardness corrosion and wear resistance - ¾ wrench flats on muzzle devices - Shim set Included

These 3 Lug adapters are HK pattern and will work with any 3 lug silencer on the market made to this standard. They will also work with Griffin 3 lug interface assemblies - Made from 17-4ph stainless and Melonite QPQ treated.

Griffin Armament is proud to introduce DUAL-LOK our newest QD mounting system for rifle suppressors. The DUAL-LOK system is comprised from two parts the DUAL-LOK Mount and the DUAL-LOK muzzle device (of your choice). This page is for the DUAL-LOK Titanium Minimalist Brake. - The muzzle device integrates 60 machined mounting position grooves which is doubled by the mount’s two locking positions hence the double entendre DUAL-LOK. How is this achieved? The mounts’ two locking positions are machined out of phase of one another by 3 degrees which provides the 120 effective locking positions and ensures a tightly mounted and locked suppressor. When the suppressor is installed only one of the two positions will generally function by allowing the spring to push the locking collar rearward over the splines. - Constructed of 17-4 PH stainless steel the DUAL-LOK Minimalist Brake has a wear resistant baffle that increases suppressor service life. Additionally the brake features compensating ports that help reduce muzzle climb while assisting in reducing felt recoil. The Minimalist Brake weighs 2.6 ounces and is less than an 1.5 long adding minimal weight and length compared to that of most competing suppressor mounts. The lighter weight reduces suppressor system weight while making the host firearm barrel lighter and more responsive to the shooter. Each brake comes with a shim set for timing. - The 6.5mm option allows for optimal braking performance and sound performance with a suppressor on 6.5 grendel 6.5 creedmoor 260 remington 6.5x47 Lapua etc. - Diameter: 1.07 [grooves] .93 [unit] - OAL: 1.42 - Weight: 2.3 oz - Materials: 17-4 Stainless Steel - Finish: QPQ Nitrided - Key points : - Utility patent pending - Wear free mounting system requires no consumable parts - Taper lock interface ensures security and accuracy - 120 effective positions ensure a rock-solid suppressor mount and provide extremely low POI shift - Sacrificial baffle to extend the service life of your silencer - Lighter than most market competitive suppressor mounts - 17-4 PH Stainless steel - Nitrided for increased surface hardness corrosion and wear resistance - ¾ wrench flats on muzzle devices - Shim set Included