RCBS Universal Hand Priming Tool 90201

RCBS No. 38 Shell Holder 99238

RCBS Headed Decapping Pin, 5 Pack 90164

RCBS Full Length Die Set, For 6.5 Creedmoor 32901

RCBS Full Length Die Set, For .308 Winchester 15501

RCBS Exp-Decapping Unit, For 223 Caliber 09802

RCBS Decapping Pin, Large, 5 Pack 09609

RCBS Primer Pocket Brush Head, Large 09577

RCBS Decapping Pin, Small, 5 Pack 09608

RCBS Universal Case Loading Block 09452

RCBS Bullet Puller Without Collet 09440

RCBS No. 16 Shell Holder 09216

RCBS No. 10 Shell Holder 09210

RCBS No. 14 Shell Holder 09214

RCBS No. 3 Shell Holder 09203

RCBS No. 6 Shell Holder 09206

RCBS Single Stage shell holders are built from hardened steel and designed to properly align the case with the reloading die in single-stage and turret presses. They’re sized to fit specific case heads and capture 0.125 inch of the case head for proper SAAMI headspacing.

The new RangeMaster 2000 high-performance electronic scale handles up to 2000 grains with +/-0.1 grain accuracy to precisely measure powder bullets cases or loaded cartridges. It provides right- or left-handed operation and a wealth of big-time features. Compact size and the ability to operate on AC or DC power make it perfect for use on the bench or at the range. The touchscreen LCD is easy to read and operate and provides an auto shut off function to save the battery. The scale is fast and easy to calibrate with the two included calibration/check weights. This scale is designed for serious shooters who want the best high-tech scale on the market and it delivers! - 2000-grain capacity - +/-0.1 grain accuracy - Backlit LCD display - Touchscreen operation - 9-volt DC or 120/240 VAC four-country power supply - Two 50-gram calibration/check weights - Ambidextrous metal scale pan - Dust/storage cover - Battery saving auto shut off - One-year limited warranty

The RCBS Hand Case Neck Turner is designed to peel brass from the outside of a case neck to a consistent thickness which is important because most commercially available brass has variances in neck thickness. This leads to case neck concentricity and bullet run-out issues. Truing up the case neck produces more consistent and accurate hand loaded ammunition. The cutter portion uses caliber specific pilot/mandrels (sold separately) to guide the case neck. The cutter design can zero the cutter to the pilot/mandrel and then use the micrometer adjustment to dial the desired case neck thickness in .0005-inch increments. The cutter can also be set for right or left handed use. - Caliber specific pilot/mandrels (sold separately) guide the case neck - Cutter design can zero the cutter to the pilot/mandrel and then use the micrometer adjustment to dial the desired case neck thickness in .0005-inch increments - Right- or left-handed use.

Primer Pocket Uniformers are manufactured with carbide cutters and serve to true the primer pocket wall and bottom.

Six variable high-speed rotating stations (four at <350 rpm; two at <550 rpm) - Two fixed stations for case neck brushes - Tools included for all stations - Storage area for tools not in use - 120-240 VAC for operation in multiple countries - US UK EU and Australian power cords - 2-year limited warranty - Getting brass ready to reload used to be a long arduous process. No more. The RCBS Brass Boss features six variable speed rotating stations that completely prepare trimmed brass for reloading all in one stop. The Brass Boss includes tools for all six stations: an inside VLD chamfering tool outside deburring tool primer pocket cleaner (small/large) military crimp remover (small/large) primer pocket uniformer (small/large) case neck brushes (four diameters) and a tub of dry case neck lubricant. Save time elbow grease and process brass efficiently with Brass Boss.

The RCBS Trim Pro—2 Power Case Trimmer has the same improved spring-loaded universal shell holder as the manual trimmer but with a high-torque low-RPM motor. The self-feeding spring-fed cutter makes case trimming easy and accurate. No pushing or feeding pressure is required leaving hands free to do other case preparation tasks such as chamfering deburring or primer pocket cleaning. The positive locking handle and integral power switch makes operation simple and safe. Note: Cases with rim diameters larger than .625-inch must be trimmed on the 90352 High Capacity Trimmer. - Manual on/off switch aids in setting case trim length - Kit includes pilots: .22 .24 .25 .27 .28 .30 .35 .44 and .45

These caliber-specific pilot and chamfer tools allow reloaders to change the caliber of their 3-way cutter to work with a variety of different calibers.

The RCBS Trim Pro 3-Way Cutter is automated case preparation at its finest one of those accessories reloaders can’t live without. Its unique three-blade head configuration trims cases like the standard cutting tool but in addition to trimming to length inside blades chamfer the case while an outside blade deburrs it. The 3-Way cutter attaches easily to both Case Trimmers and Trim Pros. Note: not for 17 to 20 caliber.