The Browning Recoil Hawg ranks among the most effective muzzle brakes in the industry. It reduces muzzle jump significantly to keep the target in your scope. - Multi-port design reduces felt recoil up to 76% (depending on caliber) - Top and side ports direct gases to reduce muzzle rise - Closed bottom design helps reduce dust signature during firing - Rugged all-steel construction - Multi-caliber design that is suitable for rifles that are .30 caliber or smaller. - The Standard Recoil Hawg will fit most bull and heavy-sporter profile rifle barrels with a minimum barrel shoulder of .700 and a 5/8-24 TPI or 1/2-28 TPI threaded muzzle. The Standard Recoil Hawg fits Long Range and Varmint/Target models of X-Bolt Rifles. - The Sporter Recoil Hawg will fit most sporter contour rifle barrels with an M13 x 1.25 or M13 x .75 threaded muzzle. The Sporter Recoil Hawg fits X-Bolt Speed and Sporter models of X-Bolt rifles. - Measurements Sporter Recoil HAWG 2.2 L x .8 W

The Browning Recoil Hawg ranks among the most effective muzzle brakes in the industry. It reduces muzzle jump significantly to keep the target in your scope. - Multi-port design reduces felt recoil up to 76% (depending on caliber) - Top and side ports direct gases to reduce muzzle rise - Closed bottom design helps reduce dust signature during firing - Rugged all-steel construction - Multi-caliber design that is suitable for rifles that are .30 caliber or smaller. - The Standard Recoil Hawg will fit most bull and heavy-sporter profile rifle barrels with a minimum barrel shoulder of .700 and a 5/8-24 TPI or 1/2-28 TPI threaded muzzle. The Standard Recoil Hawg fits Long Range and Varmint/Target models of X-Bolt Rifles. - The Sporter Recoil Hawg will fit most sporter contour rifle barrels with an M13 x 1.25 or M13 x .75 threaded muzzle. The Sporter Recoil Hawg fits X-Bolt Speed and Sporter models of X-Bolt rifles. - Measurements Sporter Recoil HAWG 2.2 L x .8 W

The Browning Recoil Hawg ranks among the most effective muzzle brakes in the industry. It reduces muzzle jump significantly to keep the target in your scope. - Multi-port design reduces felt recoil up to 76% (depending on caliber) - Top and side ports direct gases to reduce muzzle rise - Closed bottom design helps reduce dust signature during firing - Rugged all-steel construction - Multi-caliber design that is suitable for rifles that are .30 caliber or smaller. - The Standard Recoil Hawg will fit most bull and heavy-sporter profile rifle barrels with a minimum barrel shoulder of .700 and a 5/8-24 TPI or 1/2-28 TPI threaded muzzle. The Standard Recoil Hawg fits Long Range and Varmint/Target models of X-Bolt Rifles. - The Sporter Recoil Hawg will fit most sporter contour rifle barrels with an M13 x 1.25 or M13 x .75 threaded muzzle. The Sporter Recoil Hawg fits X-Bolt Speed and Sporter models of X-Bolt rifles. - Measurements Sporter Recoil HAWG 2.2 L x .8 W

It’s no secret that magnum calibers pack a wallop and an afternoon ringing steel behind a magnum rifle can be taxing. While zeroing your rifle with a few rounds before a hunt is tolerable the rising popularity of long range shooting has made comfort and recoil control priorities. - In response Browning has developed one of the most effective muzzle brakes in the industry. The new Recoil Hawg devours felt recoil and muzzle jump — proven to reduce recoil up to 77% (depending on the caliber). This reduction makes the punchy 300 RUM have felt recoil similar to that of a 6.5 Creedmoor. Specially designed directional porting blows gases up and to the sides to minimize dust signature. Muzzle jump is also limited to keep shooters looking downrange at their target. - Get a Recoil Hawg on your rifle and shoot with more comfort and confidence than ever before. - Multi-port design reduces felt recoil up to 73% (depending on caliber) - Top and side ports direct gases to reduce muzzle rise - Closed bottom design helps reduce dust signature during firing - Rugged all-steel construction - Multi-caliber design fits most rifle barrels .30 caliber or smaller with a 5/8-24 TPI or 1/2-28 TPI threaded muzzle

It’s no secret that magnum calibers pack a wallop and an afternoon ringing steel behind a magnum rifle can be taxing. While zeroing your rifle with a few rounds before a hunt is tolerable the rising popularity of long range shooting has made comfort and recoil control priorities. - In response Browning has developed one of the most effective muzzle brakes in the industry. The new Recoil Hawg devours felt recoil and muzzle jump — proven to reduce recoil up to 77% (depending on the caliber). This reduction makes the punchy 300 RUM have felt recoil similar to that of a 6.5 Creedmoor. Specially designed directional porting blows gases up and to the sides to minimize dust signature. Muzzle jump is also limited to keep shooters looking downrange at their target. - Get a Recoil Hawg on your rifle and shoot with more comfort and confidence than ever before. - Multi-port design reduces felt recoil up to 73% (depending on caliber) - Top and side ports direct gases to reduce muzzle rise - Closed bottom design helps reduce dust signature during firing - Rugged all-steel construction - Multi-caliber design fits most rifle barrels .30 caliber or smaller with a 5/8-24 TPI or 1/2-28 TPI threaded muzzle

It’s no secret that magnum calibers pack a wallop and an afternoon ringing steel behind a magnum rifle can be taxing. While zeroing your rifle with a few rounds before a hunt is tolerable the rising popularity of long range shooting has made comfort and recoil control priorities. - In response Browning has developed one of the most effective muzzle brakes in the industry. The new Recoil Hawg devours felt recoil and muzzle jump — proven to reduce recoil up to 77% (depending on the caliber). This reduction makes the punchy 300 RUM have felt recoil similar to that of a 6.5 Creedmoor. Specially designed directional porting blows gases up and to the sides to minimize dust signature. Muzzle jump is also limited to keep shooters looking downrange at their target. - Get a Recoil Hawg on your rifle and shoot with more comfort and confidence than ever before. - Multi-port design reduces felt recoil up to 73% (depending on caliber) - Top and side ports direct gases to reduce muzzle rise - Closed bottom design helps reduce dust signature during firing - Rugged all-steel construction - Multi-caliber design fits most rifle barrels .30 caliber or smaller with a 5/8-24 TPI or 1/2-28 TPI threaded muzzle

Material: 17-4 Stainless Steel - Color: Black - Pockets: Black Oxide - Choke Gauge: 12 - Weight: 4.8 oz - Stainless steel with black oxide finish - Rifled design is extremely effective with both sabot and Foster slugs - Threaded for 12 gauge Invector-Plus back-bored barrels only

Material: 17-4 Stainless Steel - Color: Black - Length: 0.1 - Pockets: Black Oxide - Choke Gauge: 12 - Choke Pattern Percentage: 80%-85% - Weight: 4.8 oz

Standard Invector tubes are available in constrictions ranging from Cylinder to Extra-Full Produces excellent patterns with excellent uniform densities All Browning tubes are set to industry constriction standards Flush fit does not extend beyond end of barrel.Constructed of highly polished 17-4 stainless steel for the ultimate in performance and durability.

Material: 17-4 Stainless Steel - Color: Titanium Nitride - Length: 0.01 - Pockets: Titanium Nitride - Choke Gauge: 12 - Choke Pattern Percentage: 25%-55% - Weight: 4.8 oz

Invector-Plus tubes are available in constrictions ranging from Cylinder to Extra-Full Longer choke taper inside Invector-Plus choke tubes for use with back-bored barrels Produces excellent patterns with excellent uniform densities All Browning tubes are set to industry constriction standards.Flush fit does not extend beyond end of barrel.Constructed of highly polished 17-4 stainless steel for the ultimate in performance and durability.UPC: 23614239925

Standard Invector tubes are available in constrictions ranging from Cylinder to Extra-Full Produces excellent patterns with excellent uniform densities All Browning tubes are set to industry constriction standards Flush fit does not extend beyond end of barrel.Constructed of highly polished 17-4 stainless steel for the ultimate in performance and durability.

The Invector DS choke tubes are the most innovative choke system to hit the market. Unique Double Seal design features a brass alloy ring around the base of the tube to effectively seal the area between the tube and the barrel wall against gas and residue that make the tube difficult to remove. The DS choke tubes remain significantly cleaner even under heavy use than other choke tubes. The thin wall configuration and longer overall length allows longer parallel surfaces for maximum shot pattern performance. Overall length: 3-1/4’’ Flush mount Brass seal Thin wall construction.UPC: 23614373551

The Invector DS choke tubes are the most innovative choke system to hit the market. Unique Double Seal design features a brass alloy ring around the base of the tube to effectively seal the area between the tube and the barrel wall against gas and residue that make the tube difficult to remove. The DS choke tubes remain significantly cleaner even under heavy use than other choke tubes. The thin wall configuration and longer overall length allows longer parallel surfaces for maximum shot pattern performance. Overall length: 3-1/4’’ Flush mount Brass seal Thin wall construction

The Invector DS choke tubes are the most innovative choke system to hit the market. Unique Double Seal design features a brass alloy ring around the base of the tube to effectively seal the area between the tube and the barrel wall against gas and residue that make the tube difficult to remove. The DS choke tubes remain significantly cleaner even under heavy use than other choke tubes. The thin wall configuration and longer overall length allows longer parallel surfaces for maximum shot pattern performance. Overall length: 3-1/4’’ Flush mount Brass seal Thin wall construction.UPC: 23614373537

The Invector DS choke tubes are the most innovative choke system to hit the market. Unique Double Seal design features a brass alloy ring around the base of the tube to effectively seal the area between the tube and the barrel wall against gas and residue that make the tube difficult to remove. The DS choke tubes remain significantly cleaner even under heavy use than other choke tubes. The thin wall configuration and longer overall length allows longer parallel surfaces for maximum shot pattern performance. Overall length: 3-1/4’’ Flush mount Brass seal Thin wall construction.UPC: 23614373520

Browning 1130153 Midas Browning 12 Gauge Full Extended 17-4 Stainless Steel Oxide

Material: 17-4 Stainless Steel - Color: Black - Pockets: Black Oxide - Choke Gauge: 20 - Choke Pattern Percentage: 35%-65% - Length: 0.02 - Weight: 4.8 oz

Material: 17-4 Stainless Steel - Color: Black - Pockets: Black Oxide - Choke Gauge: 20 - Choke Pattern Percentage: 25%-55% - Length: 0.01 - Weight: 4.8 oz

The Gold Band tube. Workhorse tubes for sporting or hunting. Exceptional patterning. Choose from a full selection designed to fit 20 gauge Invector-Plus shotgun barrels only. - The Midas touch. These exceptional tubes extend beyond the end of the barrel for easy removal and installation. They are tough with their stainless steel construction with black oxide finish and laser-etched gold accent band. If you are looking to upgrade from flush mount Invector-Plus tubes this is an excellent tube to do it with. Performance and practicality meet here. - Minimum gap geometry plus high-resolution “RMS” finish reduce plastic buildup in the bore - Invector-Plus long taper choke tube technology - Made for barrels designated as 20 gauge Invector-Plus ONLY - Material 17-4 Stainless Steel - Color Black - Pockets Black Oxide - Choke Gauge 20 - Choke Pattern Percentage 45%-75% - Length 0.025 - Weight 4.8 oz

The Gold Band tube. Workhorse tubes for sporting or hunting. Exceptional patterning. Choose from a full selection designed to fit 20 gauge Invector-Plus shotgun barrels only. - The Midas touch. These exceptional tubes extend beyond the end of the barrel for easy removal and installation. They are tough with their stainless steel construction with black oxide finish and laser-etched gold accent band. If you are looking to upgrade from flush mount Invector-Plus tubes this is an excellent tube to do it with. Performance and practicality meet here. - Minimum gap geometry plus high-resolution “RMS” finish reduce plastic buildup in the bore - Invector-Plus long taper choke tube technology - Made for barrels designated as 20 gauge Invector-Plus ONLY - Material 17-4 Stainless Steel - Color Black - Pockets Black Oxide - Choke Gauge 20 - Choke Pattern Percentage 55%-85% - Length 0.035 - Weight 4.8 oz

Material: 17-4 Stainless Steel - Color: Black - Length: 0.04 - Pockets: Black Oxide - Choke Gauge: 12 - Choke Pattern Percentage: 75%-85% - Weight: 4.8 oz

Material: 17-4 Stainless Steel - Color: Black - Length: 0.02 - Pockets: Black Oxide - Choke Gauge: 12 - Choke Pattern Percentage: 30%-60% - Weight: 4.8 oz

Material: 17-4 Stainless Steel - Color: Black - Length: 0.03” - Pockets: Black Oxide - Choke Gauge: 12 - Choke Pattern Percentage: 45%-75% - Weight: 4.8 oz