YHM developed this Universal Rifle Suppressor Mount to convert existing suppressors from other manufacturers to utilize your barrel threading as a direct mounting system. Due to its simplistic design there is virtually no way to incorrectly install the suppressor and risk the chance of it coming loose yet it provides easy removal. - To install simply remove your existing mount mechanism from your suppressor and thread on our Universal Rifle Suppressor Mount using a 3/4 open end wrench. Then simply thread the now two-piece suppressor onto your barrel. - 17-4PH Heat Treated Material - Melonite QPQ Finish - 1-3/8-24 Mount Thread Pitch - Weight: 1.696 oz

The popular 5C2 Flash Hider has been redesigned to work with the 6.8mm SPC cartridge 7.62X39mm cartridge and 9mm cartridge. This 5 port design has no downward facing port which helps eliminate dust problems when shooting in the prone position. This flash hider keeps the aggressive front end for use in hand to hand situations. - For 1/2-36 threaded barrels only. Includes crush washer.

The new Sidwewinder M2 suppressor is optimized to give you an affordable lightweight suppressor packed with features typically found on more expensive models. The booster system has been completely redesigned and now uses the industry’s unofficial standard piston. Pistons from SilencerCo Rugged Dead Air etc. can be used in the Sidewinder M2 and vice versa. The redesign also includes the ability to swap pistons without the use of tools thanks to a new rear cap. The front cap has been redesigned to allow for better engagement with the takedown tool to make the service process easier. - The Sidewinder utilizes a high-efficiency mono-core baffle made from 7075-T6 aluminum that is class 3 hardcoat anodized. The outer tube is made from 6061-T6 aircraft quality aluminum which is also finished with class 3 hardcoat anodize. These materials offer high strength and longevity in a lightweight package. The Piston Nielsen Sleeve and Blast Baffle are constructed from heat treated 17-4ph stainless steel. This type of stainless steel is extremely resistant to corrosion and wear and will not degrade when exposed to extreme temperatures. - The Sidewinder M2 is user serviceable which allows both the baffle and Nielsen device to be removed for cleaning and maintenance using the provided disassembly tool. Our Nielsen device enables flawless semi-automatic operation on all relevant host pistols. The Sidewinder M2 has 12 index points that allow you to adjust point of impact while remaining attached to the host firearm. - The average dry sound signature of the Sidewinder M2 .45 when testing to Mil-Std 1474D is 133 dB dry on a Glock G21 using 230gr. FMJ ammunition. Shooting the suppressor wet will net even quieter results. - Caliber .45 Cal. - Overall Length 9.3 Inches - Diameter 1.375 Inches - Weight 10.55 Ounces - Suppression Level 133 dB on G21 230 gr - Material Aircraft Quality Aluminum and 17-4 Stainless Steel - Finish Type III Hardcoat Anodized Matte Black - Method of Attachment .578-28 RH

YHM developed this Universal Rifle Suppressor Mount to convert existing suppressors from other manufacturers to utilize your barrel threading as a direct mounting system. Due to its simplistic design there is virtually no way to incorrectly install the suppressor and risk the chance of it coming loose yet it provides easy removal. - To install simply remove your existing mount mechanism from your suppressor and thread on our Universal Rifle Suppressor Mount using a 3/4 open end wrench. Then simply thread the now two-piece suppressor onto your barrel. - 17-4PH Heat Treated Material - Melonite QPQ Finish - 1-3/8-24 Mount Thread Pitch - Weight: 1.696 oz

YHM’s .R45 suppressor is our most versatile suppressor system to date. It was created to provide the shooting enthusiast a quiet lightweight and cost effective suppressor. This one suppressor can be used on a variety of calibers such as .45 ACP 9mm Luger 5.56mm NATO .300 Blackout .308 Winchester and even .45-70! The notched rim and tri-port muzzle on the end cap make it stand out among the crowd. Like the R9 the R45® uses a tubeless design which consists of heat treated 17-4 stainless steel. - The R45® ships with 2 wrenches and a 5/8-24 Direct Thread HUB Adapter. - Caliber 45 Cal. - Max Caliber .45-70 Government - Overall Length 6.45 - Diameter 1.563 - Weight 13 Oz. - Suppression Level 132dB on a 7.8 barrel with 230 gr. FMJ - Material 17-4 Ph SS - Finish Matte Black Cerakote - Method of Attachment 5/8-24 Direct Thread HUB Adapter - Full Auto Rated Limited Use

Length: 1.8125 - Diameter: .75 - Material: 4140 Steel - Finish: Black Phosphate - Thread Size: sRx - Introducing the YHM® sRx Short Flash Hider! - YHM’s new line of sRx products were designed with aesthetics and ease-of-use as the top priorities and that is no different for the YHM ® sRx Short Flash Hider (YHM-4445’s). This Q.D Flash Hider comes in three variations (5/8 x 24 5/8 x 32 & 11/16 x 24) and it’s compatible Q.D. Adapter/Mounting Interface attaches to the industry standard (HUB) 1-3/8 x 24 threads. It features an internal taper seal-in front of the threads-that locks your suppressor on and forms a tight seal to contain gasses while in-use. This means no gasses or debris can build up on the threads. - The sRx Short Flash Hider must be paired with The YHM sRx Adapter (YHM-4400). - The sRx Short Flash Hider adds minimal length and weight to the suppressor set up while also allowing you to reap all the benefits of the new YHM® sRx System-when used in conjunction with The sRx Adapter. The full YHM® sRx (Suppressor Rx) System will be the obvious choice for someone looking for a sleek low-profile suppressor set up-that’s also built to withstand rigorous use. This is our prescription for the shooter who cares about the aesthetics of their build as well as its ease-of-use. - Some of the exciting new benefits of the YHM® sRx System are as follows: - TIMELESS. (No need to shim/time to barrel) - Small/low profile - No moving parts - Large taper in front of the threads allows for consistent mounting. - Lighter than many Q.D. mounting offerings on the market - Can be permanently attached to firearm barrel needed

Length: 1.8125 - Diameter: .75 - Material: 4140 Steel - Finish: Black Phosphate - Thread Size: sRx - Introducing the YHM® sRx Short Flash Hider! - YHM’s new line of sRx products were designed with aesthetics and ease-of-use as the top priorities and that is no different for the YHM ® sRx Short Flash Hider (YHM-4445’s). This Q.D Flash Hider comes in three variations (5/8 x 24 5/8 x 32 & 11/16 x 24) and it’s compatible Q.D. Adapter/Mounting Interface attaches to the industry standard (HUB) 1-3/8 x 24 threads. It features an internal taper seal-in front of the threads-that locks your suppressor on and forms a tight seal to contain gasses while in-use. This means no gasses or debris can build up on the threads. - The sRx Short Flash Hider must be paired with The YHM sRx Adapter (YHM-4400). - The sRx Short Flash Hider adds minimal length and weight to the suppressor set up while also allowing you to reap all the benefits of the new YHM® sRx System-when used in conjunction with The sRx Adapter. The full YHM® sRx (Suppressor Rx) System will be the obvious choice for someone looking for a sleek low-profile suppressor set up-that’s also built to withstand rigorous use. This is our prescription for the shooter who cares about the aesthetics of their build as well as its ease-of-use. - Some of the exciting new benefits of the YHM® sRx System are as follows: - TIMELESS. (No need to shim/time to barrel) - Small/low profile - No moving parts - Large taper in front of the threads allows for consistent mounting. - Lighter than many Q.D. mounting offerings on the market - Can be permanently attached to firearm barrel needed

Length: 1.8125 - Diameter: .75 - Material: 4140 Steel - Finish: Black Phosphate - Thread Size: sRx - Introducing the YHM® sRx Short Flash Hider! - YHM’s new line of sRx products were designed with aesthetics and ease-of-use as the top priorities and that is no different for the YHM ® sRx Short Flash Hider (YHM-4445’s). This Q.D Flash Hider comes in three variations (5/8 x 24 5/8 x 32 & 11/16 x 24) and it’s compatible Q.D. Adapter/Mounting Interface attaches to the industry standard (HUB) 1-3/8 x 24 threads. It features an internal taper seal-in front of the threads-that locks your suppressor on and forms a tight seal to contain gasses while in-use. This means no gasses or debris can build up on the threads. - The sRx Short Flash Hider must be paired with The YHM sRx Adapter (YHM-4400). - The sRx Short Flash Hider adds minimal length and weight to the suppressor set up while also allowing you to reap all the benefits of the new YHM® sRx System-when used in conjunction with The sRx Adapter. The full YHM® sRx (Suppressor Rx) System will be the obvious choice for someone looking for a sleek low-profile suppressor set up-that’s also built to withstand rigorous use. This is our prescription for the shooter who cares about the aesthetics of their build as well as its ease-of-use. - Some of the exciting new benefits of the YHM® sRx System are as follows: - TIMELESS. (No need to shim/time to barrel) - Small/low profile - No moving parts - Large taper in front of the threads allows for consistent mounting. - Lighter than many Q.D. mounting offerings on the market - Can be permanently attached to firearm barrel needed

Meet The Turbo T3-The newest member of the YHM Turbo suppressor family! This 5.56 NATO Suppressor sports an intentional design improvement to the internal geometry of the baffles-resulting in reduced blowback-when compared to the previous model. Built with the same care quality and attention to detail that has defined the YHM brand for generations the Turbo was originally created to supply the modern suppressor community with a full-featured American Made suppressor at an affordable price. The Turbo T3 has continued that mission and it’s MSRP includes a Q.D. Muzzle Brake -or- Q.D. Flash Hider a Phantom Q.D. Adapter and 2 suppressor wrenches. All YHM products are also backed by our Lifetime Manufacturer’s Warranty. The Turbo T3 is made from heat-treated 17-4 stainless steel along with a heat-treated 718 Inconel blast baffle. The combination of these materials allows the suppressor to be full auto-rated and designed for rigorous use. The overall length measures 5.59 (6.5 with Phantom Q.D. Adapter) with a 1.5625 diameter -all while weighing in at a surprising 12.8 oz! Having an average sound pressure level of 134dB on a 14.5 AR shooting 55-grain ammo the Turbo T3 is well within the hearing safe threshold of 140 dB. - Weight:...............................12.8 oz (with Phantom Q.D. Adapter) - Diameter:...........................1.5625 - Length:................................5.59 (6.5 with Phantom Q.D. Adapter) - Construction:.....................17-4 Ph SS / Inconel - Mount:................................1 3/8-24 Adaptable Interface - Decibel Rating:...................134 dB - Minimum Barrel Lengths: 5.56 NATO: 10 minimum barrel length

Meet The Fat Cat®-The newest member of the YHM suppressor family! This 5.56 NATO suppressor sports new baffle geometry resulting in reduced blowback. Built with the same care quality and attention to detail that has defined the YHM® brand for generations the Fat Cat® was created to provide a compact suppressor with great sound. The Fat Cat® is made from 17-4 stainless steel along with a heat-treated 718 Inconel blast baffle. The combination of these materials allows the suppressor to be full auto-rated and designed for rigorous use. The overall length measures just 4.5 with the sRx adapter installed. That’s a full inch shorter than our Turbo K model with it’s included adapter. The Fat Cat’s larger 1.94 diameter creates more internal volume resulting in a lower more pleasant tone. With an average sound pressure level of 141dB at the muzzle the Fat Cat® is quite the performer for its size. Also available is the optional cat end cap YHM-2210 with the Cat’s Ass design on the cap. The Fat Cat® includes the Mini sRx Mount and 2 suppressor tools. - All YHM products are also backed by our Limited Lifetime Manufacturer’s Warranty. - Weight: 10.6 oz - Weight with Adapter 12.5 oz - Length: 4.25 - Length with Adapter 4.50 - Diameter 1.94 - Construction 17-4 Ph SS / Inconel - Mount: sRx Adapter with 1-3/8-24 HUB Interface - Decibel Rating: 141 dB - Minimum Barrel Lengths: 5.56 NATO: 10 minimum barrel length.

Introducing the YHM® sRx Short Muzzle Brake! - YHM’s new line of sRx products were designed with aesthetics and ease-of-use as the top priorities and that is no different for the YHM ® sRx Short Muzzle Brake (YHM-4445-MB). This Q.D Muzzle Brake comes in three variations (5/8 x 24 5/8 x 32 & 11/16 x 24) and it’s compatible Q.D. Adapter/Mounting Interface attaches to the industry standard (HUB) 1-3/8 x 24 threads. It features an internal taper seal-in front of the threads-that locks your suppressor on and forms a tight seal to contain gasses while in-use. This means no gasses or debris can build up on the threads. - The sRx Short Muzzle Brake must be paired with The YHM sRx Adapter (YHM-4400) . - The sRx Short Muzzle Brake adds minimal length and weight to the suppressor set up while also allowing you to reap all the benefits of the new YHM® sRx System-when used in conjunction with The sRx Adapter. The full YHM® sRx (Suppressor Rx) System will be the obvious choice for someone looking for a sleek low-profile suppressor set up-that’s also built to withstand rigorous use. This is our prescription for the shooter who cares about the aesthetics of their build as well as its ease-of-use. - Some of the exciting new benefits of the YHM® sRx System are as follows: - TIMELESS. (No need to shim/time to barrel) - Small/low profile - No moving parts - Large taper in front of the threads allows for consistent mounting. - Lighter than many Q.D. mounting offerings on the market - Can be permanently attached to firearm barrel needed - Length: 1.6875 - Diameter: .75 - Material: 4140 Steel - Finish: Black Phosphate - Thread Size: sRx

Introducing the YHM® sRx Short Muzzle Brake! - YHM’s new line of sRx products were designed with aesthetics and ease-of-use as the top priorities and that is no different for the YHM ® sRx Short Muzzle Brake (YHM-4445-MB). This Q.D Muzzle Brake comes in three variations (5/8 x 24 5/8 x 32 & 11/16 x 24) and it’s compatible Q.D. Adapter/Mounting Interface attaches to the industry standard (HUB) 1-3/8 x 24 threads. It features an internal taper seal-in front of the threads-that locks your suppressor on and forms a tight seal to contain gasses while in-use. This means no gasses or debris can build up on the threads. - The sRx Short Muzzle Brake must be paired with The YHM sRx Adapter (YHM-4400) . - The sRx Short Muzzle Brake adds minimal length and weight to the suppressor set up while also allowing you to reap all the benefits of the new YHM® sRx System-when used in conjunction with The sRx Adapter. The full YHM® sRx (Suppressor Rx) System will be the obvious choice for someone looking for a sleek low-profile suppressor set up-that’s also built to withstand rigorous use. This is our prescription for the shooter who cares about the aesthetics of their build as well as its ease-of-use. - Some of the exciting new benefits of the YHM® sRx System are as follows: - TIMELESS. (No need to shim/time to barrel) - Small/low profile - No moving parts - Large taper in front of the threads allows for consistent mounting. - Lighter than many Q.D. mounting offerings on the market - Can be permanently attached to firearm barrel needed - Length: 1.6875 - Diameter: .75 - Material: 4140 Steel - Finish: Black Phosphate - Thread Size: sRx

Introducing the highly anticipated Mini Q.D. Flash Hider for YHM’s fast attach sound suppressor systems. The Mini Q.D. Flash Hider is YHM engineering perfection. - Compact at only 2 1/8 inches and weighing in 3.3 ounces the Mini Q.D. Flash Hider was designed for today’s competitive shooter. No short cuts were taken and users will find that the Mini Q.D. Flash Hider is still capable of being shot comfortably unsuppressed as well as suppressed. - 2 1/8 overall length - 3.3 Oz. - Phosphate finish

Introducing the YHM® sRx Short Muzzle Brake! - YHM’s new line of sRx products were designed with aesthetics and ease-of-use as the top priorities and that is no different for the YHM ® sRx Short Muzzle Brake (YHM-4445-MB). This Q.D Muzzle Brake comes in three variations (5/8 x 24 5/8 x 32 & 11/16 x 24) and it’s compatible Q.D. Adapter/Mounting Interface attaches to the industry standard (HUB) 1-3/8 x 24 threads. It features an internal taper seal-in front of the threads-that locks your suppressor on and forms a tight seal to contain gasses while in-use. This means no gasses or debris can build up on the threads. - The sRx Short Muzzle Brake must be paired with The YHM sRx Adapter (YHM-4400) . - The sRx Short Muzzle Brake adds minimal length and weight to the suppressor set up while also allowing you to reap all the benefits of the new YHM® sRx System-when used in conjunction with The sRx Adapter. The full YHM® sRx (Suppressor Rx) System will be the obvious choice for someone looking for a sleek low-profile suppressor set up-that’s also built to withstand rigorous use. This is our prescription for the shooter who cares about the aesthetics of their build as well as its ease-of-use. - Some of the exciting new benefits of the YHM® sRx System are as follows: - TIMELESS. (No need to shim/time to barrel) - Small/low profile - No moving parts - Large taper in front of the threads allows for consistent mounting. - Lighter than many Q.D. mounting offerings on the market - Can be permanently attached to firearm barrel needed - Length: 1.6875 - Diameter: .75 - Material: 4140 Steel - Finish: Black Phosphate - Thread Size: sRx

This flash hider is used for our Q.D. Phantom Sound Suppressor. It retains the excellent flash hiding capabilities of the original Phantom. This flash hider also accepts our Phantom 7.62 Sound Suppressor. This flash hider will *NOT* accommodate our .22 Q.D. or 9mm Q.D. suppressors. Available in a wide variety of thread sizes.

Barrel Shim Set to be used to correctly orient a timed muzzle device. This set is used with our 5.56mm Q.D. Muzzle Brakes. This shim kit has an inner diameter of 1/2 - Included with this shim kit are shims with the following thicknesses: - 2x 0.002 - 5x 0.005 - 1x 0.020

Yankee Hill Machine Co Universal Suppressor Mount, Coverts HUB Mount to Direct Thread, M13.5X1LH, Melonite QPQ Finish, Black YHM-2189-M 13.5 X 1 TPI Fits Most Suppressor Brands • 15in Free-Float MLOK Rail/ Ambi Bolt Release

Yankee Hill Machine Co Universal Suppressor Mount, Coverts HUB Mount to Direct Thread, 5/8"-32, Melonite QPQ Finish, Black YHM-2189-32 5/8 X 32 TPI Fits Most Suppressor Brands • 15in Free-Float MLOK Rail/ Ambi Bolt Release

Yankee Hill Machine Co Universal Suppressor Mount, Coverts HUB Mount to Direct Thread, 11/16"-24, Melonite QPQ Finish, Black YHM-2189-24B 11/16X24 TPI Fits Most Suppressor Brands • 15in Free-Float MLOK Rail/ Ambi Bolt Release

Yankee Hill Machine Co Universal Suppressor Mount, Coverts HUB Mount to Direct Thread, 5/8"-24, Melonite QPQ Finish, Black YHM-2189-24 5/8X24 TPI Fits Most Suppressor Brands • 15in Free-Float MLOK Rail/ Ambi Bolt Release

Yankee Hill Machine Co Turbo K-RB, Suppressor, 556NATO, 1/2"-28 Muzzle Break, Steel, Black YHM-2180-MB-28

Yankee Hill Machine Co Turbo K-RB, Suppressor, 556NATO, 1/2"-28 Flash Hider Included, Steel, Black YHM-2180-28

Yankee Hill Machine Co Suppressor Cover, 5.5" Long, Black, Will fit YHM Turbo and Turbo T2 Sound Suppressors YHM-HTP-5.5Rated to 3000 Degrees 1000 Denier Cordura Nylon • Finish: Black • Overall length: 5.5" • 15in Free-Float MLOK Rail/ Ambi Bolt Release

Yankee Hill Machine Co Suppressor Cover, 6.875" Long, Black, Will fit YHM Resonator and Resonator R2 Sound Suppressors YHM-HTP-6.8Rated to 3000 Degrees 1000 Denier Cordura Nylon • Finish: Black • Overall length: 6.8" • 15in Free-Float MLOK Rail/ Ambi Bolt Release