ZEV PRO MTC BRL G17 GEN1-4

ZEV PRO MTC BRL G19 GEN1-5

ZEV PRO MTC BRL G17 GEN1-4 1/2X28

PRO COMP V2 13.5X1 LH THRD 9MM BLK

The ZEV Muzzle Device was designed to provide the dual benefit of flash suppression and muzzle rise reduction. The shoulder of the muzzle device extends over the barrel to cover the included crush washer and provide a uniform appearance. Wrench flats are incorporated for ease of installation. - The ZEV Muzzle Device is only compatible with barrels that have a .750 or smaller gas block journal due to the fact that the body of the muzzle device extends over the shoulder of the barrel. - Provides flash suppression and muzzle rise reduction - Crush Washer included

You’ll notice the coffin shaped window on top and the three windows per side cuts weight and reduces recoil impulse. The deep serrations at both the front and rear of the slide create a more aggressive grip to insure a solid purchase during manipulations. The Hellbender slide provides durability and accuracy when it matters most. - Manufactured in our state-of-the-art manufacturing facility from a single billet of 17-4 stainless steel to tighter tolerances than factory slides for increased consistency in barrel lockup for improved accuracy and performance. - All ZEV slides have our patented optic cut that features threaded mounting posts machined into the slide. The increased surface area of these posts allows added engagement with the threads of the mounting screws while providing a more stable and secure optic mounting platform. With the deepest optic cut in the industry the red dot sight sits low in the slide allowing co-witness with standard height sights. - ZEV slides weigh less than factory slides therefore reduce reciprocating weight which reduces fatigue and allows for faster shot follow-up placement. - Technical Specs - Machined from 17-4 Stainless steel billet - Lowered ejection port to aid in ejection of brass - Match grade precision milled tolerances that are tighter than factory - Improved accuracy and grouping performance upon installation - DLC or PVD coatings offered have a Rockwell hardness rating above that of factory coatings - RMR cover plate included - Specs - Length 7.25 - Width 1 - Height 0.84 - Weight 9.3 oz

A positive grip as well as channels on the top of the slide to reduce glare. No matter your slide grip location preference during manipulation press checks or malfunction clearing drills the angled serrations keep your hand from slipping off the slide by naturally moving your hand downward and on to the slide when pulling back whether wearing gloves or not. - Our stainless steel slides are designed to improve accuracy and performance. They are manufactured in our state-of-the-art manufacturing facility from a single billet of 17-4 stainless steel to tighter tolerances than factory slides for increased consistency in barrel lockup which improves accuracy. - All ZEV slides have our patented optic cut which features posts allowing for more thread area keeping your optic securely mounted to your slide. ZEV slides weigh less than factory slides therefore reduce reciprocating weight which reduces fatigue and allows for faster shot follow-up placement. - ZEV Stripped Slides features: - Machined from 17-4 Stainless steel billet - Lowered ejection port to aid in ejection of brass - Match grade precision milled tolerances that are tighter than factory - Improved accuracy and grouping performance upon installation - DLC or PVD coatings offered have a Rockwell hardness rating above that of factory coatings - RMR adapter plate included

A positive grip as well as channels on the top of the slide to reduce glare. No matter your slide grip location preference during manipulation press checks or malfunction clearing drills the angled serrations keep your hand from slipping off the slide by naturally moving your hand downward and on to the slide when pulling back whether wearing gloves or not. - Our stainless steel slides are designed to improve accuracy and performance. They are manufactured in our state-of-the-art manufacturing facility from a single billet of 17-4 stainless steel to tighter tolerances than factory slides for increased consistency in barrel lockup which improves accuracy. - All ZEV slides have our patented optic cut which features posts allowing for more thread area keeping your optic securely mounted to your slide. ZEV slides weigh less than factory slides therefore reduce reciprocating weight which reduces fatigue and allows for faster shot follow-up placement. - ZEV Stripped Slides features: - Machined from 17-4 Stainless steel billet - Lowered ejection port to aid in ejection of brass - Match grade precision milled tolerances that are tighter than factory - Improved accuracy and grouping performance upon installation - DLC or PVD coatings offered have a Rockwell hardness rating above that of factory coatings - RMR adapter plate included